BENDIX M-12-M-12R ANTILOCK MODULATOR Dokumentacja Pobierz pdf (Strona 90)

Windsor-Severence Fire Protection District

Heavy Rescue

Production Specification

SVI #774 Page 90 of 126 April 19, 2010

CURBSIDE COMPARTMENT - FRONT (C1)

The interior useable compartment width shall be approximately 64.0" wide.

The compartment door opening shall be approximately 57.0" wide.

This compartment shall have a Robinson roll-up door.

 The roll-up door shall have an un-painted satin aluminum finish on the door slats and the door trim components.

 There shall be NO keyed lock on this roll-up compartment door.

 One (1) nylon strap shall be provided to assist in closing the door. The strap shall be fastened to the left side of

the lower inside door sill. The strap shall extend from the left side of the lower inside door sill to a footman loop

attached to the center of the left side of the door frame.

 One (1) aluminum drip pan/door finish guard shall be provided with the rollup door.

Compartment threshold protection plate shall be installed on the bottom edge of the compartment door opening. The

threshold protection shall be fabricated from an aluminum extrusion with an anodized exterior finish.

COMPARTMENT COMPONENTS

 There shall be vertically mounted aluminum shelf trac for shelving installation.

 There shall be one (1) 750 lbs. slide-out tray(s) with an OnScene Solutions base approximately 70" deep and as

wide as the compartment layout or door opening permits located above the level of the chassis frame rails.

 3M™ Diamond Grade™ Conspicuity striping shall be provided on the front and side faces of the tray. The striping

shall be 2" wide and red/white in color.

 The floor of the compartment above the frame rails shall be extended to the interior edge of the door. The floor

shall have a 2" vertical lip and a 1" return to increase strength.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 125 126

Brak uwag

BENDIX M-12-M-12R ANTILOCK MODULATOR Dokumentacja Strona 90