Windsor-Severence Fire Protection District
Heavy Rescue
Production Specification
SVI #774 Page 100 of 126 April 19, 2010
HEAVY DUTY 100% EXTENSION TOOLBOARD - ALUMINUM
Heavy duty aluminum toolboard shall be provided in exterior compartment as indicated in the numbered compartment list.
Toolboard shall be fabricated from 3/16" (.188) aluminum 3003H-14 alloy smooth plate. The toolboard shall be mounted
on a OnScene Solutions slide frame constructed of anodized aluminum extrusion(s). The frame shall be assembled using
stainless steel fasteners (no welds). Each slide shall use a three extrusion rail design utilizing twelve to sixteen (12 - 16)
urethane rollers. Each roller shall contain two (2) precision roller bearings mounted in an aluminum hub with a molded on
urethane cover. The rollers shall not lose contact with the rail extrusion during operation of the slide unit.
Each slide shall have a cable operated, spring loaded latch complimented by a red "T" handle (Pull to Release). The slide
shall lock in the closed and full extension positions. The slide shall be rated for a maximum evenly distributed load of
1,000 lbs.
TRANSVERSE STORAGE MODULE
Transverse storage module for long equipment shall be provided as indicated in the numbered compartment list.
The module shall be fabricated from 1/8" (.125") thick smooth aluminum. Exact size and layout shall be approved prior to
construction.
AIR BAG MODULE
An air bag module rack shall be supplied in the exterior compartment located as indicated in the numbered compartment
list.
The module shall be fabricated of 1/8" (.125) smooth aluminum plate with individual sections for each air bag.
Circular notches shall be provided along the front edge for ease of removing air bags with gloved hand. Modules shall be
large enough for specified air bag and matching plywood panels. Exact size and layout shall be approved prior to
construction.
SCBA CYLINDER STORAGE MODULE
An SCBA cylinder storage module shall be provided and located as indicated in the numbered compartment list.
The module shall have an exterior shell fabricated from 1/8" (.125) smooth aluminum. The module shall have a 2" slope,
front to back to prevent cylinders from sliding out. The SCBA cylinder storage tubing shall be fabricated from PVC pipe to
prevent damage or abrasion to cylinders. In addition there shall be rubber matting provided in base of each storage tube
for bottle protection and prevent slipping
LISTA DRAWER CABINET
Lista Drawer Cabinet(s), model HS450-04LM, shall be provided in exterior compartment as indicated in the numbered
compartment list.
The drawer cabinet(s) shall be 21 3/4" high x 40-1/4" wide x 22-1/2' deep. The cabinet shall have four (4) individual
locking drawers. The drawers shall have usable heights as follows: one (1) 2", one (1) 3", one (1) 4", and one (1) 5". The
cabinet shall be Light Gray in color.
(116 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji