BENDIX MC-12 MODULATOR CONTROLLER ASSY Instrukcja Naprawy Pobierz pdf (Strona 6)

More info: visit www.bendix.com 1-800-AIR-BRAKE (1-800-247-2725)

1. Park the vehicle on a level surface, apply the

parking brakes, and always block the wheels.

Always wear safety glasses.

2. Stop the engine and remove ignition key when

working under or around the vehicle. When

working in the engine compartment, the engine

should be shut off and the ignition key should be

removed. Where circumstances require that the

engine be in operation, EXTREME CAUTION

should be used to prevent personal injury resulting

from contact with moving, rotating, leaking, heated

or electrically charged components.

3. Do not attempt to install, remove, disassemble

or assemble a component until you have read

and thoroughly understand the recommended

procedures. Use only the proper tools and observe

all precautions pertaining to use of those tools.

4. If the work is being performed on the vehicle’s

air brake system, or any auxiliary pressurized air

systems, make certain to drain the air pressure

from all reservoirs before beginning ANY work

on the vehicle. If the vehicle is equipped with

an AD-IS

air dryer system or a dryer reservoir

module, be sure to drain the purge reservoir.

5. Following the vehicle manufacturer’s recommended

procedures, deactivate the electrical system in a

manner that safely removes all electrical power

from the vehicle.

6. Never exceed manufacturer’s recommended

pressures.

7. Never connect or disconnect a hose or line

containing pressure; it may whip. Never remove

a component or plug unless you are certain all

system pressure has been depleted.

8. Use only genuine Bendix

replacement parts,

components and kits. Replacement hardware,

tubing, hose, ﬁ ttings, etc. must be of equivalent

size, type and strength as original equipment and

be designed speciﬁ cally for such applications and

systems.

9. Components with stripped threads or damaged

parts should be replaced rather than repaired. Do

not attempt repairs requiring machining or welding

unless speciﬁ cally stated and approved by the

vehicle and component manufacturer.

10. Prior to returning the vehicle to service, make

certain all components and systems are restored

to their proper operating condition.

11. For vehicles with Antilock Traction Control (ATC),

the ATC function must be disabled (ATC indicator

lamp should be ON) prior to performing any vehicle

maintenance where one or more wheels on a drive

axle are lifted off the ground and moving.

Air Brake System General Precautions

IMPORTANT

The systems presented in this manual are intended for illustrative purposes

only and are not intended to be used for actual vehicle piping.

WARNING! PLEASE READ AND FOLLOW THESE

INSTRUCTIONS TO AVOID PERSONAL INJURY OR DEATH:

When working on or around a vehicle, the following general

precautions should be observed at all times.

General Precautions

1 2 3 4 5 6 7 8 9 10 11 ... 69 70

Komentarze do niniejszej Instrukcji

Brak uwag

BENDIX MC-12 MODULATOR CONTROLLER ASSY Instrukcja Naprawy Strona 6

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Modulator BENDIX MC-12 MODULATOR CONTROLLER ASSY