BENDIX M-21-M-22 ANTILOCK MOD ASSY Dokumentacja Strona 77
- Strona / 98
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
7 SPN SID FMI Fault Codes
73
Meritor WABCO Maintenance Manual MM-0112 (Revised 05-13)
Figure 7.14
SPN SID FMI
Blink
Code
Description
Warning
Light
System
Reaction
Cause Action
Left Rear Modulator Valve
797 9 3 2 + 4
Shorted to
UBATT
ABS WL
ABS Wheel
Disabled
ESC/RSC/ATC/
HSA Disabled
Continuity between
Inlet (IV) or Outlet
(OV) and battery
voltage or another
modulator wire
(short circuit) is
detected.
• Verify valve resistance of 4.0-9.0 ohm between IV to ground and OV to ground for 12v
system (11.0-21.0 ohms for 24v system).
• Verify resistance through harness and valve together is the same as valve by itself.
• Verify no voltage between Inlet/Outlet circuit and ground at the valve.
• Verify no voltage through the harness with ECU unplugged and Key ON.
• Check for corroded or damaged wiring between the ECU and the modulator valve.
797 9 5 2 + 4 Open Circuit ABS WL
ABS Wheel
Disabled
ESC/RSC/ATC/
HSA Disabled
ECU has detected
that Inlet (IV), Outlet
(OV) or both are not
connected.
• Verify valve resistance of 4.0-9.0 ohm between IV to ground and OV to ground for 12v
system (11.0-21.0 ohms for 24v system).
• Verify resistance through harness and valve together is the same as valve by itself.
• Check if connectors are fully seated and verify no open connections.
• Check for corroded or damaged wiring between the ECU and the modulator valve.
797 9 6 2 + 4
Shorted to
Ground
ABS WL
ABS Wheel
Disabled
ESC/RSC/ATC/
HSA Disabled
Continuity between
Inlet (IV) or Outlet
(OV) and ground
(short circuit) is
detected.
• Verify valve resistance of 4.0-9.0 ohm between IV to ground and OV to ground for 12v
system (11.0-21.0 ohms for 24v system).
• Verify resistance through harness and valve together is the same as valve by itself.
• Check for corroded or damaged wiring between the ECU and the modulator valve.
Right Rear Modulator Valve
798 10 3 2 + 3
Shorted to
UBATT
ABS WL
ABS Wheel
Disabled
ESC/RSC/ATC/
HSA Disabled
Continuity between
Inlet (IV) or Outlet
(OV) and battery
voltage or another
modulator wire
(short circuit) is
detected.
• Verify valve resistance of 4.0-9.0 ohm between IV to ground and OV to ground for 12v
system (11.0-21.0 ohms for 24v system).
• Verify resistance through harness and valve together is the same as valve by itself.
• Verify no voltage between Inlet/Outlet circuit and ground at the valve.
• Verify no voltage through the harness with ECU unplugged and Key ON.
• Check for corroded or damaged wiring between the ECU and the modulator valve.
798 10 5 2 + 3 Open Circuit ABS WL
ABS Wheel
Disabled
ESC/RSC/ATC/
HSA Disabled
ECU has detected
that Inlet (IV), Outlet
(OV) or both are not
connected.
• Verify valve resistance of 4.0-9.0 ohm between IV to ground and OV to ground for 12v
system (11.0-21.0 ohms for 24v system).
• Verify resistance through harness and valve together is the same as valve by itself.
• Check if connectors are fully seated and verify no open connections.
• Check for corroded or damaged wiring between the ECU and the modulator valve.
798 10 6 2 + 3
Shorted to
Ground
ABS WL
ABS Wheel
Disabled
ESC/RSC/ATC/
HSA Disabled
Continuity between
Inlet (IV) or Outlet
(OV) and ground
(short circuit) is
detected.
• Verify valve resistance of 4.0-9.0 ohm between IV to ground and OV to ground for 12v
system (11.0-21.0 ohms for 24v system).
• Verify resistance through harness and valve together is the same as valve by itself.
• Check for corroded or damaged wiring between the ECU and the modulator valve.
- For E Version ECUs 1
- 12-Volt and 24-Volt Systems 1
- Contents 3
- 1 Introduction 5
- System Components 5
- ATC Components 10
- ATC Switch 10
- XX Orientation 11
- ZZ Orientation 12
- YY Orientation 12
- ESC Components 13
- Figure 2.8 14
- Hill Start Aid (HSA) 15
- Maintenance Information 16
- ABS Indicator Lamp 16
- Diagnostics 17
- TOOLBOX™ Software Diagnostics 17
- 4010611a 18
- 4010612a 18
- 4010613a 18
- 4010614a 18
- Definitions 19
- Clear Mode 20
- Blink Code Illustrations 22
- Blink Code Conditions 23
- Blink Code Identification 24
- Wheel Speed Sensor Testing 25
- Modulator Valve Testing 26
- BAYONET-STYLE CONNECTOR 27
- OPEN-STYLE CONNECTOR 27
- CAB MOUNT ECU’S: 28
- Figure 3.18 29
- 4010617a 30
- 4010619a 30
- 4010620a 30
- Electrical Checks 31
- Software 32
- Figure 3.26 or Figure 3.27 33
- PRESSURE SENSOR CONNECTOR 34
- ESC CAN Network Testing 35
- ESC Module Testing 35
- ESC Module Mounting 36
- ECU Circuit Testing 38
- Figure 3.44 40
- Figure 3.45 40
- 4 Component Replacement 41
- Hazard Alert Messages 41
- 472 500 30. 0 44
- MADE IN GERMANY 44
- 001 20/98 44
- DO NOT MOVE OR RELOCATE 49
- 6S/6M ABS 51
- 4S/4M ABS/ATC 51
- 4S/4M RSC/ATC 52
- 4S/4M ESC/ATC 52
- ECU Connector Pin Assignments 53
- ECU (Frame-mounted) 54
- 4004027d 55
- 4004030i 56
- Figure 6.8 57
- Figure 6.9 58
- Figure 6.10 59
- Figure 6.11 60
- Figure 6.12 61
- Figure 6.13 62
- Figure 6.14 63
- 7 SPN SID FMI Fault Codes 64
- SPN SID FMI Fault Code List 64
- 4010669a 88
- 4010670a 88
- 4010671a 88
- 8 Appendix I 89
- 9 Appendix II 91
- Troy, MI 48084-7121 98
Powiązane produkty i podręczniki dla Modulator BENDIX M-21-M-22 ANTILOCK MOD ASSY
(55 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.129 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji