BENDIX BW2000 Instrukcja Użytkownika Pobierz pdf (Strona 27)

8 Caliper Suspension sealing

(Replacement of inner Boot (9) )

(for the Axial and Radial Disc Brake)

Remove Caliper (see Section 10.1)

Remove Ring (58)

Pull out Sleeve (5)

Push out Boot (9) with screw driver.

Inspect and clean contact area of Boot (9)

Put new Boot (9) into the Cup (arrow) of the Tool C

(Order No II19253).

Position Sleeve with Boot (9) into the Caliper bore

and pull in.

Fit the Sleeve (5)

The Boot end must engage in the groove of the

Sleeve (5) (arrow). Lock with Ring (58) by pushing

on until it engages.

Important:

Before fitting the Caliper, the unsealed Sleeve with the

Rubber Bushing should be checked for its ability to

slide.

Fit Caliper (see Section 10.2).

M+P-KN-025

VF 00127/15

M+P-KN-026

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Brak uwag

BENDIX BW2000 Instrukcja Użytkownika Strona 27